125mm Vector Freestanding Lightbox
Stunning images with this 125mm Vector Freestanding Lightbox.
The 125mm thick aluminium frame has a silver anodised finish, which includes a groove both sides to receive SEG Graphics (Silicone Edged Graphics) This gives an edge-to-edge illuminated graphic with virtually no frame visible front on.
The 125mm units also have the option within the frame to install Foamex back panels.
The frames are simply assembled with corner brackets that are allen key tightened to the side frames, along with bracing bars to stiffen the structure.
A pair of feet are fixed to the underside of the frame to increase stability.
LED lights are incorporated into the header and base rails to ensure an even spread of back-lighting. Push-fit electrical connectors link the lights and connections together during assembly.
SEG Graphics are applied using backlit fabric with a silicone gasket sewn into the perimeter. The gasket is offered to the front corner of the frame and then inserted into the groove along the front edge. It is then pushed into the other corners and fed along the groove to ensure a suitably tight fit that stretches out any creases. This can be repeated with a graphic to the rear or a plain white sheet to contain and reflect the light within.
There are 3 standard sizes of Vector Lightbox
(height x width)
2000 x 1000mm
2000 x 2000mm
2000 x 3000mm
Custom sizes are also available by quotation.
Delivery - Vector LED Lightboxes will take about 7 days from approval of artwork.
If it's urgent - please ask!