Panel and Pole Connections
Panel and pole systems are connected together with panel clips that grip poles between the panels.
There are 2 pole diameters that we use - 16mm and 25mm. 16mm is thinner than the thickness of the panels, which means that graphics can span across the pole joint and remain flat.
Poles can be in one piece, but, to make transport easier, they are usually split into lengths to match the height of each panel. This means that to connect the poles together they need to have spigotted joints. The threaded spigot (male) fits into a threaded hole in the pole end (female),
Poles are finished with a grey coated finish.
Standard lengths for both 16 and 25mm poles are:
Baseplates and Feet are available to aid the stabilty of your Panel and Pole Stand. We recommend the heavier Circular Baseplates for off the floor panel displays and straighter runs or wall ends. Straight feet are not heavy enough to provide structural resistance
300mm Circular Baseplate - 3Kg weight
350mm Straight Foot - 0.12kg weight
50mm Panel Support Washers - to support heavier 'off-the-floor' panels
Kickstrip - protects the bottom of panels
Spare Pole Clips (10 per pack)
Double Pole Clips (10 per pack)
Please contact us for more details or ask us to quote:
Phone: 01327 844165