Vector LED Wall Mounted Lightbox
Vibrant images with this Vector LED Wall Mounted Lightbox.
The 75mm thick aluminium frame has a silver anodised finish, which includes a front groove to receive SEG Graphics (Silicone Edged Graphics). This gives an edge-to-edge illuminated graphic with virtually no frame visible front on.
The frame is L-shaped, providing strength and an aluminium face against the wall which you can drill through for screw fixing to the wall. Screws should be positioned 2 in each corner and at no more than 1000mm centres, in accordance with the user instructions. The wall behind the lightbox can be painted white to help with light reflectance, or alternatively, the frame includes a channel at the rear into which a white panel can be inserted.
The frames are simply assembled with corner brackets that are allen key tightened to the side frames. Bracing bars to stiffen the structure can be supplied, along with stabilising feet, should you wish to use the lightbox as a freestanding unit.
LED lights are incorporated into the header and base rails to ensure an even spread of back-lighting. Push-fit electrical connectors link the lights and connections together during assembly.
SEG Graphics are applied using backlit fabric with a silicone gasket sewn into the perimeter. The gasket is offered to the front corner of the frame and then inserted into the groove along the front edge. It is then pushed into the other corners and fed along the groove to ensure a suitably tight fit that stretches out any creases. This can be repeated with a graphic to the rear or a plain white sheet to contain and reflect the light within.
There are 3 standard sizes of Vector Wall Mounted Lightbox
(height x width)
2000 x 1000mm
2000 x 2000mm
2000 x 3000mm
Custom sizes are also available by quotation.
Delivery - Vector LED Wall Lightboxes will take about 7 days from approval of artwork.
If it's urgent - please ask!